Filson PTFE Filter Cartridge
- High flow rate capacity&large surface area
- Reduced size for less installation space
- consistent removal of submicron particles
- Extremely fine accuracy achieves 0.05µm
- PTFE material for eminent hydrophobicity
- Specifications
- Applications
- Send Us Inquiry
Filson PTFE filter cartridge can provide a consistent and accurate filtration level of 0.05µm even in harsh and corrosive conditions. Therefore, you can utilize it for filtering acids like hydrofluoric acid, nitric acid, or aggressive solvents such as isopropanol and chloroform.
- OD: 2.7”/69mm
- ID: 1”/25.4mm
- Lengths: 5”-40”
- Filter media: PTFE membrane
- Core material: polypropylene(PP)
- End caps: polypropylene(PP)
- Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, PTFE
- Filtration area: 8.5 ft 2 per 10” filter cartridge
- Nominal micron rates: 0.05µm, 0.1µm, 0.2µm, 0.45µm, 1.0µm
- Operating temperature: Max. 203°F at 15 psid
- Recommended change-out pressure:35 psid/2.4 bar
- Differential pressure: 75 psid-70°F, 40 psid-176°F, 15 psid-203°F
Note: available micron rates are depending on your particular application
- Hydrofluoric acid
- Nitric acid
- Sulfuric acid
- Chloroform
- Isopropanol
- Corrosive bases
- Oxidizing air/gas
- Organic solvents
Filson PTFE Filter Cartridge
Your Trusty Copartner on PTFE Filter Cartridge
Filson PTFE filter cartridge is generally made of polytetrafluoroethylene(PTFE) membrane, inner polypropylene(PP) core, additional PP support cage, and PP end caps. It shows excellent hydrophobicity and resistance to water intrusion benefits from the material property.
Filson manufactures PTFE filter cartridges with a standard outside diameter of 2.7” and inside diameter of 1”, available in lengths ranging from 5” to 40”. Besides, your individual dimensions are certainly feasible to adapt to a specific installation space.
Contact Filson for any PTFE filter cartridge questions!